Topdon Phoenix Mobile ADAS Calibration System

The Topdon Phoenix Mobile ADAS is a complete, portable calibration frame system designed for shops that need to handle Advanced Driver Assistance Systems work on modern vehicles without being locked to a fixed calibration bay. At $9,999, it ships with the full target library included — camera targets, radar reflectors, and laser positioning tools for a wide range of domestic and import makes. If your shop is seeing more ADAS recalibration work after windshield replacements, front-end repairs, and sensor replacements, this is the system built for that workflow.

Who This Is For

The Phoenix Mobile is the right choice for:

• Independent shops and collision centers handling ADAS calibration on multiple makes without a dedicated alignment bay
• Mobile calibration specialists who go on-site to dealerships, body shops, or fleet yards
• Shops already running a Topdon Phoenix diagnostic tablet who need the frame and target system to complete static calibrations

If you're doing high-volume single-make work (fleet or dealer), a fixed-bay system may suit you better. For mixed-fleet shops and mobile operators, the foldable frame design here is a genuine advantage.

Portability and Setup

• Foldable frame design: Collapsible arms and folding base legs let the system break down small enough to fit in most vehicle trunks — relevant if you're doing on-site work at dealerships or body shops
• Setup time: Experienced technicians can have the system positioned and ready in approximately 30 minutes
• Multifunctional base: 360-degree swivel wheels allow repositioning without lifting the frame, which matters when working on uneven shop floors or driveways
• Height adjustment: The frame adjusts to accommodate different vehicle heights and sensor positions

Precision Positioning

• Five-line laser device (LAM09-01): Guides accurate frame placement relative to the vehicle centerline
• Cross laser (LAM09-02): Additional reference for lateral and horizontal alignment
• Laser reflector (LAM09-03) and auxiliary mirror (LAM09-04): Support positioning workflows for specific vehicle makes and calibration procedures
• Center-positioning system: Allows micro-adjustments for precise target placement — important for procedures where even small offsets affect calibration results
• L-Type positioning bracket (LAM09-05) and plumb bob (LAM09-06): Support manual reference alignment where needed

Target Library — What's Included

This package includes targets for a broad range of LDW (Lane Departure Warning) camera calibrations across major makes. All part numbers are confirmed from the manufacturer package list:

Accessories and Positioning Tools:

• Five Line Laser — LAM09-01
• Cross Laser — LAM09-02
• Laser Reflector — LAM09-03
• Auxiliary Mirror — LAM09-04
• L-Type Positioning Bracket — LAM09-05
• Plumb Bob — LAM09-06
• Targets Storage Case — LAM09-07
• Targets Extension Rod — LAM09-08
• Targets Extension Rod II — LAM09-09

LDW Large Targets:

• VW/Audi — LAM01-02
• Hyundai/Kia — LAM01-09
• Subaru — LAM01-15
• Subaru LDW — LAM01-21

LDW Small Targets:

• Mercedes-Benz — LAM01-01
• Mazda — LAM01-10
• Hyundai/Kia — LAC01-13
• Honda — LAM01-20
• Honda Left — LAM01-04-L
• Honda Right — LAM01-04-R
• Nissan Left — LAM01-07-L
• Nissan Right — LAM01-07-R
• Mazda Left — LAM01-16-L
• Mazda Right — LAM01-16-R
• Mitsubishi Right — LAM01-19-R
• Mitsubishi Left — LAM01-19-L
• Renault/Nissan Left — LAM01-12-L
• Toyota — LAM01-06-1
• Toyota — LAM01-06-2
• Toyota — LAM01-06-3
• Honda — LAM01-17
• Suzuki Left — LAM01-18-L
• Suzuki Right — LAM01-18-R

Topdon Phoenix Compatibility

The Phoenix Mobile frame pairs with Topdon's Phoenix Series diagnostic scanners (Phoenix Mobile tablet, Phoenix Elite, and related configurations). The ADAS software running on those tablets drives the calibration procedure — the frame and targets are the hardware side. If you don't already have a Phoenix tablet, contact us to discuss the combined tablet-plus-frame bundle options. If you have a Phoenix tablet and need the frame, this is your kit.

Calibration Capability

The system supports static calibration procedures for ADAS sensors including:

• Forward-facing cameras (lane departure warning, forward collision warning, traffic sign recognition)
• Radar and millimeter-wave sensor systems where targets are supported
• AVM (around-view monitoring) and night-vision calibrations where applicable by make and software version

Dynamic calibration (road-speed recalibration after static setup) is handled through the Phoenix diagnostic software during a drive cycle. Specific vehicle coverage and calibration procedure availability depends on your Phoenix software subscription — confirm coverage for your target makes before purchase.

Practical Considerations Before You Buy

• Floor space: Even a mobile frame needs a flat, level surface with adequate clearance in front of the vehicle. Confirm your work area before setup.
• Software subscription: ADAS calibration procedures run through the Phoenix tablet software. Verify your subscription covers the makes you service most.
• Target coverage: The included targets cover the makes listed above. Additional make-specific targets may be available separately if your mix includes makes not in this package — call us to confirm.
• All-in price: At $9,999 with the full target set included, this is a competitive entry point for a complete mobile ADAS calibration system. Comparable setups from other brands often price targets separately.

Why Buy From OEM Diagnostic Tools?

• Specialist since 2016: We sell diagnostic equipment exclusively — not a general retailer that happens to carry scan tools
• Free shipping: No freight surprises on this or any order
• Free tech support: Call 866-217-0063 and talk to someone who knows this equipment
• Full manufacturer warranty: Covered under Topdon's standard warranty terms
• Honest guidance: If this system isn't the right fit for your shop's mix, we'll tell you and point you to what is

Call 866-217-0063 for quick answers and help!