Topdon Phoenix Elite + ADAS Software — Diagnostic Tablet With ADAS Calibration Capability

The Phoenix Elite is Topdon's professional-grade diagnostic tablet, and this bundle pairs it with the ADAS software subscription so you can expand into camera and radar calibration work without buying a separate dedicated system. At $2,799, you're getting a full-featured OBD scan tool that can also handle ADAS calibration when paired with the appropriate targets and calibration frame — a meaningful capability for any shop seeing a growing number of vehicles with lane-keep assist, forward collision warning, and surround-view systems.

This is not a beginner tool. It's built for technicians who need OE-level access across a wide range of makes, including the CAN FD protocol support required for late-model vehicles that older VCI hardware simply cannot communicate with.

Phoenix Elite Diagnostic Tablet — What It Does

• Topology Map: Displays the full network of vehicle modules in a single view, color-coded by communication status. Spot dead modules and bus faults without paging through individual system menus.
• CAN FD Support: The included VCI dongle supports CAN FD protocol, which is mandatory for late-model GM, Ford, BMW, and other platforms that have migrated away from classic CAN.
• Auto VIN Detection: Reads the VIN automatically on connection and populates year, make, model, and available systems — no manual selection required.
• Full Bi-Directional Controls: Active tests, component activation, special functions, coding, initialization, adaptations, and memory resets across supported makes.
• VAG Guided Functions: Step-by-step guided diagnostics for VW and Audi Group vehicles, structured around specific fault codes to reduce guesswork on German platforms.
• Pre-Scan / Post-Scan Reporting: Capture a full fault code snapshot before the repair starts, clear codes after, and run a clean post-scan. Useful for insurance documentation and customer approval workflows at collision and mechanical shops.

ADAS Software — What It Adds

The ADAS software bundle activates the calibration capability on the Phoenix Elite tablet. This covers static and dynamic calibration procedures for forward-facing cameras, radar sensors, around-view monitor (AVM) systems, and night-vision components — depending on the vehicle and what targets you have on hand.

Important: The ADAS software is the tablet-side component. To perform static calibrations, you also need the physical calibration frame and targets (sold separately as the Topdon Phoenix Mobile or Phoenix Elite ADAS frame kit). If you're buying this bundle to start doing ADAS calibrations in-bay, contact us to confirm you have the right targets for the vehicles you're targeting — a radar calibration target for a Ram truck is not the same as a forward camera target for a Honda.

• Static Calibration: Uses physical targets positioned at manufacturer-specified distances and angles in front of the vehicle. The tablet guides the procedure step by step.
• Dynamic Calibration: Drives the vehicle at speed while the system recalibrates using road markings. Some ADAS systems require dynamic, some static, some both — the software identifies which procedure applies.
• Coverage: Supports a wide range of domestic, Asian, and European vehicles. Exact make/model/system coverage is updated via software subscription. Contact us for current coverage lists if you have a specific vehicle type you're targeting.

Hardware Specifications — Phoenix Elite Tablet

• Display: 10.1-inch LCD, 1280 x 800 resolution
• Processor: 4-core, 2.0 GHz
• Operating System: Android 10
• RAM / Storage: 4 GB RAM, 64 GB ROM
• Battery: 12,000 mAh / 3.8V
• Operating Voltage: 9–18V
• Dimensions: 278 x 191 x 48 mm (10.94 x 7.52 x 1.89 inches)
• Weight: 3.45 lb (1,566.5 g)
• Working Temperature: 0°C to 50°C (32°F to 122°F)
• Languages: English, French, German, Spanish, Portuguese, Russian, Japanese, Italian, Korean, Chinese (traditional), Hungarian, Dutch, Turkish, Polish, Finnish

Hardware Specifications — VCI Dongle

• Protocols: Includes CAN FD support
• Operating Voltage: 9–18V
• Working Current: ≤150 mA
• Dimensions: 127 x 82 x 36 mm (5 x 3.22 x 1.42 inches)
• Working Temperature: -10°C to 50°C (14°F to 122°F)

What's in the Box

• 1x Phoenix Elite diagnostic tablet
• 1x VCI dongle
• 1x OBD-I adapter box / transfer line
• 1x OBD-II extension cable
• 1x cigarette lighter cable
• 1x Type-C to USB cable
• 1x battery clamps/cable set
• 1x power adapter
• 1x BMW F-chassis programming cable
• 10x non-16-pin adapter cable kit (NN-14+16, BZ-38, TA-17, TA-22, G/V-12, B-20, CR-6, HA-3, M/H-12+16, FT-3)
• 4x fuse (φ5×20mm)
• 2x fuse (φ6×30mm)
• 1x user manual
• 1x password envelope

Note: The ADAS calibration frame and physical targets are not included in this bundle. This package includes the Phoenix Elite tablet plus the ADAS software license. Frame and target kits are available separately — call us and we'll build the right configuration for your shop.

Who Should Buy This

This bundle makes sense for a shop that already does — or plans to do — ADAS calibration work and wants the diagnostic tablet and ADAS software in one purchase. If you're a mechanical shop that mostly needs diagnostics and won't be doing calibrations, the Phoenix Elite without ADAS software is a lower-cost entry point. If you're a collision shop or an ADAS-focused operation that needs the full frame and target system, contact us — we can package the frame, targets, and this tablet together so you're not piecing it together from multiple orders.

The CAN FD VCI makes this relevant for 2019-and-newer vehicles where that protocol matters. If your shop works heavily on late-model domestic and European platforms, that's a real consideration — older VCI hardware will leave you locked out of those buses entirely.

Why Buy From OEM Diagnostic Tools?

• Specialist since 2016 — We sell diagnostic and calibration equipment exclusively. This is not a side category for us.
• Free shipping on this unit to the contiguous US.
• Free tech support at 866-217-0063 — Call us before you buy if you have questions about ADAS target compatibility or coverage for your specific vehicles. Call us after you buy if setup questions come up.
• Full manufacturer warranty honored without the runaround.
• Honest guidance — If a different configuration fits your shop better, we'll tell you.

Call 866-217-0063 for quick answers and help!