TEXA Rear Video Camera Calibration Mat for Nissan — Part #3909025

If your shop handles Nissan vehicles — and most do — you already know that replacing a rear bumper, parking sensor, or even a tailgate can trigger a mandatory rear camera recalibration. This TEXA rear video camera calibration mat (part #3909025) is the OEM-specified target panel that works with the TEXA RCCS calibration system to bring Nissan rear camera systems back into factory alignment. Without the correct mat, you cannot perform a software-guided calibration — and guessing is not an option when a customer is relying on that camera to avoid backing into something.

What This Mat Does

The calibration mat is a precisely printed, dimensionally accurate target board used during the rear camera static calibration procedure. The TEXA IDC5 software, paired with a TEXA Navigator interface (NANO S or TXT), guides the technician through the placement and verification steps. The camera system reads the mat, the software measures deviation from factory parameters, and calibration values are written to the module. The result is a rear camera image that is properly aligned, correctly distortion-corrected, and safe to put back on the road.

Which Vehicles and Systems Does This Cover

This mat is designed specifically for Nissan rear video camera calibration within the TEXA RCCS workflow. Exact model and model-year coverage is confirmed through the TEXA IDC5 vehicle identification process — contact us or check your IDC5 subscription for the current Nissan coverage list. If you are regularly working on Nissan Altima, Rogue, Pathfinder, Frontier, Murano, or similar models with factory-installed rear cameras, this mat belongs in your ADAS calibration kit.

When Is This Calibration Required

• Rear bumper replacement or R&R: Any time the bumper fascia is removed, the camera mounting position can shift. Calibration is required before return to service.
• Camera or module replacement: A new camera unit does not inherit the old calibration. It must be calibrated fresh using the correct target.
• Collision repair: Frame or rear-end structural work almost always requires camera recalibration per OEM repair procedures.
• Tailgate or liftgate replacement: On vehicles where the camera is mounted in or near the tailgate handle or emblem, gate replacement requires recalibration.
• Software or module updates: Certain Nissan TSBs and software update procedures specify a camera recalibration as part of the procedure.

TEXA RCCS System Integration

This mat is a component of the broader TEXA RCCS (Radar and Camera Calibration System) ecosystem. It is used alongside the RCCS 2, RCCS 3, or RCCS 3 EVO calibration frame, which provides the self-centering laser alignment needed to position the vehicle and target correctly before calibration begins. If you already own a TEXA RCCS structure, this mat slots directly into your existing workflow — no additional hardware required beyond what you already have. If you are building out an ADAS calibration bay, this mat is one piece of a larger system. Call us and we will help you configure the right setup for your shop volume and vehicle mix.

What's in the Box

• TEXA rear video camera calibration mat for Nissan, part #3909025 — one (1) mat
• Storage and handling guidance per TEXA calibration accessory standards

Note: The TEXA RCCS frame, laser alignment system, and IDC5 software subscription are sold separately. This mat is an add-on calibration target for shops already operating within the TEXA ADAS ecosystem.

Who Needs This Mat

This mat is for the shop that is already doing ADAS calibration work — or is ready to start. If you have a TEXA RCCS frame and you are seeing Nissan vehicles come through for bumper work, collision repairs, or camera replacements, this is a straightforward purchase. It expands your calibration coverage for one of the most common domestic brands without requiring any additional equipment investment. Shops that do not yet have the TEXA RCCS structure should call us first — we will walk you through what the full Nissan ADAS calibration setup looks like and what it costs to get started properly.

Why Buy From OEM Diagnostic Tools?

OEM Diagnostic Tools has been a specialist in professional-grade diagnostic and ADAS calibration equipment since 2016. We stock TEXA calibration accessories, frames, and targets because we use them, know them, and can actually help you when something does not work the way you expected. Every order ships free. Every purchase includes the full manufacturer warranty. And our tech support line — 866-217-0063 — is answered by people who know ADAS calibration, not a call center reading from a script. If you are unsure whether this mat covers the specific Nissan models in your bay, call us before you order. We would rather give you the right answer now than process a return later.

Call 866-217-0063 for quick answers and help!