TEXA 360° Camera Calibration Mats for Toyota / Lexus / Scion / Suzuki (SKU: 3911405)

If your shop handles around-view monitor (AVM) or 360° camera systems on Toyota, Lexus, Scion, or Suzuki vehicles, these OEM-specific calibration mats are the missing piece in your TEXA RCCS workflow. Part number 3911405, this is a matched pair of floor mats engineered to the exact pattern, color, and geometry that the IDC5 software and TEXA Navigator interface expect when calibrating surround-view camera systems on these four brands.

Around-view systems use four wide-angle cameras — front, rear, left mirror, right mirror — to stitch a synthetic bird's-eye image. When any one of those cameras is removed, repositioned, or replaced (mirror replacement, body panel work, rear camera R&R, or just a firmware update that triggers a recalibration flag), the full surround-view system has to be recalibrated as a set. These mats establish the reference geometry on the floor around the vehicle so the software can confirm each camera's angle, overlap zone, and stitching alignment is within OEM spec.

What's Included

• Two calibration mats — a matched pair with the OEM-specified pattern for Toyota/Lexus/Scion/Suzuki AVM systems
• Designed for use with the TEXA RCCS 2, RCCS 3, or RCCS 3 EVO calibration structure and TEXA IDC5 ADAS software
• Patterns validated against Toyota/Lexus OEM calibration requirements

Which Vehicles This Covers

These mats are calibrated for the 360°/around-view camera systems found across the Toyota, Lexus, Scion, and Suzuki model ranges. Exact model-year coverage depends on which vehicles in those lineups are equipped with OEM surround-view — your IDC5 software will confirm coverage at the VIN level before the procedure starts. If you need a confirmed vehicle list for a specific model, contact us before ordering.

When Does a Shop Need These?

• Mirror replacement or repainting — side cameras mount in mirror housings; any R&R triggers recalibration
• Rear camera replacement — common on high-trim Lexus and Toyota models after backup camera failure or body damage
• Front camera R&R — front AVM camera is often bundled into a front grille or bumper assembly
• Post-collision repair — any structural or panel work near a camera mount requires verification
• OEM software updates — some Toyota/Lexus updates reset camera calibration flags and require a fresh procedure

How the Calibration Works

With your vehicle centered on the alignment rack or a flat, level surface, you position the mats flat on the floor at the prescribed placement points around the vehicle — front, rear, and sides. The TEXA RCCS laser alignment system ensures the mats are square to the vehicle centerline. IDC5 then walks you through the camera-by-camera capture sequence, using the mat patterns as reference targets to calculate each camera's position offset and correct the stitching overlay. The procedure is guided on-screen; no freehand measurement required.

What You Already Need

These mats are a calibration target accessory — they work within the TEXA ADAS ecosystem. To use them you need:

• TEXA RCCS 2, RCCS 3, or RCCS 3 EVO calibration structure
• TEXA Navigator TXT or NANO diagnostic interface
• Active TEXA IDC5 ADAS software subscription with 360° camera calibration enabled

If you have the RCCS structure and IDC5 but are missing brand-specific mats, this is the gap-filler for your Toyota/Lexus/Scion/Suzuki work. If you are still building out your ADAS setup, call us — we can spec the right bundle for your shop's volume and vehicle mix.

Pricing and Configuration

The 3911405 mat pair is priced at $809. Additional OEM-specific mat sets for other manufacturers are available separately. If you service multiple brands, we can help you identify which mat sets to prioritize based on your vehicle mix.

Why Buy From OEM Diagnostic Tools?

• ADAS specialist since 2016 — we stock and support the full TEXA RCCS ecosystem, not just the hardware
• Free shipping on this order
• Free tech support at 866-217-0063 — call before you buy if you need to confirm compatibility with your existing RCCS setup
• Full manufacturer warranty honored on all TEXA accessories
• Honest upgrade guidance — if you need a different mat set or a full RCCS bundle, we will tell you straight

Call 866-217-0063 for quick answers and help!