TEXA 360° Camera Calibration Mats for Kia and Hyundai — SKU 3909046

Around-view and 360° camera systems on Kia and Hyundai vehicles require precise calibration after any work that disturbs the cameras — door replacements, mirror R&R, bumper repairs, or any collision work affecting camera mounting points. These mats (sold as a pair) are the OEM-specified calibration targets for use with the TEXA RCCS (Radar & Camera Calibration System) and IDC5 software when performing surround-view camera calibration on covered Kia and Hyundai models.

What These Mats Are and What They Do

360° surround-view systems use four cameras — typically front grille, rear bumper, and both side mirrors — to stitch a composite bird's-eye image. Each camera must be individually calibrated to a known reference point so the stitching algorithm aligns correctly. These mats provide the ground-level visual reference targets that the TEXA RCCS system uses to perform that calibration. Without the correct OEM-pattern mat, the calibration routine cannot complete — generic targets will not satisfy the vehicle's calibration verification routine.

• Application: Kia and Hyundai vehicles equipped with around-view / 360° surround-view camera systems
• Sold as: Pair (two mats) — the calibration procedure requires both simultaneously
• Compatible system: TEXA RCCS 2, RCCS 3, and RCCS 3 EVO calibration structures with IDC5 ADAS software
• Replaces: OEM dealer-specific calibration mat sets for Kia/Hyundai surround-view procedures
• TEXA Part Number: 3909046

When Calibration Is Required

Any shop doing collision repair, mirror replacement, door work, or camera R&R on Kia or Hyundai vehicles with surround-view systems needs to perform 360° camera calibration before returning the vehicle. This includes:

• Side mirror replacement or repair (mirror cameras)
• Front or rear bumper removal and reinstallation (front grille and rear cameras)
• Any collision repair affecting camera mounting points or angles
• Camera unit replacement due to failure or damage
• Any work where the vehicle DTCs indicate a surround-view calibration fault

What You Need to Run This Calibration

These mats are a component of the broader TEXA RCCS workflow. To perform surround-view calibration on Kia and Hyundai vehicles, your shop needs:

• TEXA RCCS frame (RCCS 2, RCCS 3, or RCCS 3 EVO) — provides the self-centering laser alignment structure
• TEXA Navigator interface (NANO S or TXT) — communicates with the vehicle via OBD
• TEXA IDC5 ADAS software — guides the calibration procedure step by step
• This mat pair (3909046) — the Kia/Hyundai-specific 360° ground targets

If you already own a TEXA RCCS system and are expanding your Kia/Hyundai coverage, this mat pair is the specific accessory you need. Contact us if you are unsure which RCCS configuration your shop currently has — we can confirm compatibility before you order.

Who Needs This

This mat set is a direct purchase for shops that already have TEXA RCCS equipment and are adding or expanding Kia/Hyundai 360° camera work. It is also a necessary add-on when configuring a new TEXA RCCS system for a shop with significant Kia or Hyundai volume — particularly collision centers, dealership service departments, or independent shops in markets where these brands are common.

If you are not yet set up with a TEXA RCCS system, call us. We can spec out the right RCCS configuration for your shop's brand mix and volume, including which additional mat sets you will need at the start.

Why Buy From OEM Diagnostic Tools?

• TEXA specialist since 2016 — we know the RCCS lineup, the software, and the calibration workflow inside and out
• Free ground shipping on orders over $99
• Free tech support at 866-217-0063 — if you have a question about which mats your RCCS needs or how to run a Kia/Hyundai 360° calibration, call us
• Full manufacturer warranty on every TEXA product we sell
• Honest guidance — we will tell you if this mat set fits your existing equipment before you order

Call 866-217-0063 for quick answers and help!