TEXA Night Vision Calibration Target — VAG Group (S12619)

The TEXA Night Vision Target for VAG (Volkswagen Audi Group) vehicles is a manufacturer-specific calibration panel used with the TEXA RCCS (Radar & Camera Calibration System) to restore proper function to infrared night vision cameras after service. If your shop handles Audi, Volkswagen, Porsche, SEAT, or Škoda vehicles equipped with night vision assist, this is the panel that makes calibration possible.

What This Panel Does

Night vision systems on VAG vehicles use a forward-facing infrared camera to detect pedestrians, animals, and obstacles beyond the reach of headlights. Like any ADAS sensor, this camera requires calibration after it has been disturbed — whether through windshield replacement, front-end collision repair, camera removal and reinstallation, or any suspension or ride-height adjustment that changes the vehicle's forward geometry.

Without proper calibration, the night vision system may produce false alerts, fail to detect targets at the correct range, or disable itself entirely. This TEXA target panel provides the OEM-specific reference surface the TEXA IDC5 software uses to verify and correct the camera's aim and sensitivity.

Designed for the TEXA RCCS Ecosystem

• Compatible structures: Mounts to the TEXA RCCS 2, RCCS 3, and RCCS 3 EVO calibration frames
• Guided by IDC5 software: The TEXA Navigator (NANO S or TXT) interface and IDC5 ADAS module walk technicians through each step — positioning, target placement, and calibration verification
• Self-centering laser alignment: The RCCS structure's built-in laser system positions the panel at the correct distance and angle relative to the vehicle centerline, removing guesswork from setup
• VAG-specific pattern: The target surface matches the pattern and reflectivity specification required by VAG OEM calibration procedures — this is not a generic panel

Who Needs This Panel

• Collision repair shops: Any front-end repair on a VAG vehicle with night vision requires post-repair calibration. This panel is required to complete that job correctly.
• Glass replacement shops: Windshield R&R on night-vision-equipped Audi and Volkswagen models triggers a recalibration requirement. Without this target, you cannot fulfill that requirement with the TEXA system.
• Independent ADAS calibration centers: If you're building a VAG-capable ADAS service offering alongside your RCCS structure, this panel belongs in your kit.
• Dealer-level independents: Shops that specialize in European makes and want to handle VAG ADAS work in-house rather than subcontracting it.

Calibration Triggers — When This Target Is Required

• Windshield replacement on vehicles with night vision assist
• Night vision camera removal or replacement
• Front bumper or front fascia removal
• Front suspension repair or alignment that affects ride height or caster
• Any collision repair involving the front of the vehicle
• OBD fault codes related to night vision system misalignment or unavailability

VAG Group Coverage

This panel is designed for VAG Group vehicles equipped with night vision assist systems. Coverage spans models across Audi, Volkswagen, Porsche, SEAT, and Škoda where night vision is a factory-installed option. Exact model-year and trim-level coverage is confirmed through the TEXA IDC5 vehicle selection workflow. If you need to verify coverage for a specific VIN before purchasing, contact us directly.

What's in the Box

• TEXA Night Vision calibration target panel (VAG specification)
• Mounting hardware compatible with TEXA RCCS 2 / RCCS 3 / RCCS 3 EVO frames

Note: The RCCS calibration structure, TEXA Navigator interface, and IDC5 software license are sold separately. This panel is an add-on target for shops that already operate a TEXA RCCS system.

Why Buy From OEM Diagnostic Tools?

• ADAS specialist since 2016: We stock and support the full TEXA RCCS ecosystem — structures, targets, interfaces, and software — not just individual components.
• Free shipping on this panel to the contiguous US.
• Free tech support at 866-217-0063: If you have questions about panel compatibility, RCCS structure requirements, or IDC5 software setup for VAG night vision calibration, our team can walk you through it.
• Full manufacturer warranty backed by TEXA North America.
• Honest upgrade guidance: If you're building out a complete TEXA ADAS capability and need help selecting the right RCCS structure or additional target panels for your vehicle mix, we'll tell you exactly what you need — and what you don't.

Call 866-217-0063 for quick answers and help!