TEXA Mazda Radar Calibration Kit — Part 3909092

If your shop works on Mazda vehicles and you're replacing windshields, performing front-end repairs, or removing and reinstalling radar or camera sensors, this calibration kit is what closes out the job correctly. The TEXA Mazda Radar Calibration Kit (3909092) is an OEM-specific target panel and accessory kit designed to work within the TEXA RCCS calibration ecosystem — giving you the hardware you need to perform manufacturer-approved radar and camera calibration procedures on Mazda platforms.

This is not a universal target. It is a Mazda-specific kit, meaning the panels, geometry, and positioning requirements are built around Mazda's calibration specifications. Used with a TEXA RCCS 2, RCCS 3, or RCCS 3 EVO calibration structure and a TEXA Navigator interface running IDC5 software, this kit enables proper static calibration of Mazda ADAS components following manufacturer procedures.

What This Kit Is For

• Windshield Replacement: Any time a Mazda windshield is replaced, the forward-facing camera mounted behind it must be recalibrated. This kit provides the correct target for that procedure.
• Radar Sensor R&R: Front radar and corner radar units on Mazda vehicles must be calibrated after removal, reinstallation, or any front-end work that disturbs sensor alignment.
• Front-End and Suspension Repairs: Wheel alignment and front-end repairs can shift ADAS sensor aim. Calibration after this work is required to restore system function.
• Collision Repair: Post-collision repair involving the front bumper, grille structure, or sensor mounts requires calibration verification and adjustment.

TEXA RCCS Ecosystem Compatibility

This kit is a component within the TEXA RCCS system — it does not operate standalone. To use it, your shop needs:

• TEXA RCCS Frame: RCCS 2, RCCS 3, or RCCS 3 EVO calibration structure with self-centering laser alignment
• TEXA Navigator Interface: NANO S, NANO S+ or TXT Multi diagnostic interface
• TEXA IDC5 Software: Active subscription with ADAS calibration module enabled

The RCCS laser system handles vehicle centering and target positioning automatically, removing the guesswork from target placement. The IDC5 software then walks the technician through the Mazda-specific calibration routine, step by step, with pass/fail verification built in.

Who Needs This Kit

• Independent shops doing Mazda windshield work — If you're replacing glass on CX-5, CX-9, Mazda3, Mazda6, or other Mazda models equipped with forward-facing cameras, you need this target to complete the calibration.
• Collision repair centers — Any Mazda front-end repair that disturbs radar or camera sensor position requires a documented calibration procedure. This is the hardware that makes that possible with TEXA equipment.
• Shops already invested in TEXA RCCS — If you have the RCCS frame and software, adding manufacturer-specific kits like this one expands your covered vehicle range without purchasing a separate system.

What's Included

The 3909092 kit includes the Mazda-specific calibration target panels and mounting hardware required to perform radar and camera calibration within the TEXA RCCS system. Exact panel count and accessory configuration are specific to this kit — contact us at 866-217-0063 to confirm contents and compatibility with your existing TEXA setup before ordering.

A Note on Coverage

Mazda ADAS calibration requirements vary by model year, trim level, and which systems are equipped (front camera only vs. front camera plus front/corner radar vs. 360-view systems). Confirm that your target Mazda models are covered under your IDC5 subscription and that this kit addresses the specific sensors you're calibrating. If you're unsure, call us — we'll walk through compatibility with you before you order.

Why Buy From OEM Diagnostic Tools?

• ADAS specialist since 2016 — We focus on professional diagnostic and calibration equipment, not general tool catalogs.
• Free shipping on this kit to the continental US.
• Free tech support at 866-217-0063 — Call us if you have questions about RCCS compatibility, IDC5 setup, or calibration workflow for your Mazda vehicles.
• Full manufacturer warranty — TEXA-backed coverage on all hardware.
• Honest guidance — If this kit isn't the right fit for your shop's setup, we'll tell you that before you buy.

Call 866-217-0063 for quick answers and help!