TEXA Front Video Camera Calibration Panel for VAG — Part 3907349

This is the manufacturer-specific calibration target panel used with the TEXA RCCS (Radar & Camera Calibration System) to perform front video camera calibration on VAG Group vehicles — Volkswagen, Audi, Skoda, and SEAT. If your shop works on any VAG platform and you're replacing windshields, pulling front cameras, or doing front-end structural repairs, this panel is a required component of a correct, OEM-compliant ADAS recalibration procedure.

The integrated bubble level is not a convenience feature — it's a calibration requirement. The panel must be perfectly level for the camera to lock onto the target correctly. Without it, you're guessing at a procedure that directly affects lane-keeping assist, automatic emergency braking, and forward collision warning. This panel takes that variable off the table.

What This Panel Does

• Front Camera Target for VAG Platforms: Designed specifically for Volkswagen, Audi, Skoda, and SEAT vehicles equipped with front-facing video cameras used for lane departure warning, lane keep assist, and forward collision systems.
• Bubble Level Included: Ensures the panel is properly leveled before calibration begins — a hard requirement for accurate target acquisition by the vehicle's camera system.
• RCCS System Integration: Used with TEXA's RCCS 2, RCCS 3, or RCCS 3 EVO calibration frame and TEXA IDC5 software. The software walks the technician through positioning, distance, and the calibration sequence guided by the TEXA Navigator diagnostic interface.
• OEM-Specific Pattern: The target pattern on this panel matches what VAG's camera systems are programmed to recognize. Generic or aftermarket panels will not produce valid calibration results on these platforms.

When Is This Calibration Required?

• Windshield Replacement: Any time the windshield is pulled on a VAG vehicle with a front camera mounted to it, recalibration is mandatory before returning the vehicle to the customer.
• Camera Removal or Replacement: R&R of the front camera unit itself always requires recalibration.
• Front-End Collision Repair: Structural work, bumper replacement, or any repair that changes the geometry of the front of the vehicle can shift camera aim enough to require recalibration.
• Suspension or Alignment Work: Changes to ride height or front suspension geometry that affect the vehicle's pitch can impact camera calibration.

Who Needs This Panel?

This panel is for shops already running TEXA RCCS equipment that are expanding their VAG coverage, or replacing a worn or damaged panel. If you're a glass shop, collision center, or general repair facility doing volume work on Volkswagen and Audi platforms, this is a consumable part of your ADAS workflow — not an optional add-on.

If you don't yet have an RCCS frame or TEXA diagnostic interface, contact us. We'll walk you through the full system configuration that fits your shop's volume and vehicle mix.

What's in the Box

• TEXA front video camera calibration panel for VAG (Part 3907349)
• Integrated bubble level

Note: This panel requires a TEXA RCCS calibration frame (RCCS 2, RCCS 3, or RCCS 3 EVO) and active TEXA IDC5 software subscription for use. Compatible diagnostic interface (TEXA Navigator NANO or TXT) also required.

Why Buy From OEM Diagnostic Tools?

• ADAS Specialists Since 2016: We focus on professional diagnostic and calibration equipment. We know the TEXA ecosystem and can help you configure the right setup for your shop.
• Free Shipping: On all orders to the continental US.
• Free Tech Support: Call 866-217-0063. Our team can answer questions about RCCS compatibility, panel selection, and calibration workflow.
• Full Manufacturer Warranty: All TEXA products sold through us carry the full manufacturer warranty.
• Honest Upgrade Guidance: Not sure if this panel covers your VAG vehicle mix, or whether you need additional panels for other platforms? We'll tell you straight — no upsell for its own sake.

Call 866-217-0063 for quick answers and help!