TEXA Front Video Camera Calibration Panel for Nissan Type 1 — SKU 3907347

If your shop does windshield replacements or front-end work on Nissan vehicles, this calibration panel is the missing piece between the repair and a safe vehicle back on the road. The TEXA 3907347 is the OEM-specified front video camera calibration target for Nissan Type 1 applications, designed to work within the TEXA RCCS (Radar & Camera Calibration System) framework. It ships complete with a bubble level so you can confirm the panel is perfectly plumb before you trigger the calibration routine — because a panel that's even slightly off will produce a camera alignment that fails at highway speeds.

What This Panel Does

Modern Nissan vehicles use a forward-facing camera mounted at or near the windshield to power lane departure warning, automatic emergency braking, lane keep assist, and traffic sign recognition. When that camera is disturbed — whether from a windshield pull, a bracket removal, or a front-end collision repair — it needs to be recalibrated to the vehicle's centerline and to a known fixed reference point at a specific distance and height. This panel provides that reference target. It is not a generic ADAS board. It is the Nissan Type 1 specific pattern that TEXA IDC5 software expects to see when running the front camera static calibration procedure on compatible Nissan models.

Where It Fits in the TEXA RCCS Workflow

• Compatible systems: Used with TEXA RCCS 2, RCCS 3, or RCCS 3 EVO calibration structures
• Software: TEXA IDC5 with active ADAS license drives the calibration procedure and confirms pass/fail
• Interface: TEXA Navigator TXT or NANO connects the vehicle to IDC5 during the calibration sequence
• Panel role: Mounted on the RCCS frame at the correct height and distance (determined by IDC5 and the self-centering laser alignment system), this target gives the camera a known pattern to lock onto during the static calibration routine
• Bubble level included: Confirms the panel is level before you start — a requirement for accurate results

When Nissan Camera Calibration Is Required

• After any windshield replacement on a Nissan equipped with a forward-facing camera
• After removal or replacement of the camera bracket or camera unit itself
• After front-end structural repair or alignment work that affects the camera mounting angle
• After any repair where the camera was disconnected and repositioned
• Per Nissan OEM repair procedures, calibration is required — not optional — in these scenarios

Who Needs This Panel

If you're running a TEXA RCCS system and you see Nissan vehicles regularly — including Altima, Rogue, Sentra, Murano, Pathfinder, Kicks, and other models equipped with ProPILOT Assist or standard ADAS packages — this is a panel you'll reach for consistently. Auto glass shops handling Nissan windshield work need it. Collision centers doing Nissan structural repairs need it. Any shop running the TEXA ADAS platform that hasn't added this panel is turning away Nissan calibration revenue or sending customers somewhere else.

If you're unsure whether this is the correct panel for a specific Nissan model or trim level, contact us before ordering. Nissan uses more than one camera system configuration across its lineup, and panel compatibility depends on the specific ADAS system installed in the vehicle. We can verify fitment against your vehicle list.

What's in the Box

• TEXA front video camera calibration panel for Nissan Type 1 (part number 3907347)
• Bubble level for panel alignment verification

Why Buy From OEM Diagnostic Tools?

• ADAS specialists since 2016 — we stock TEXA RCCS panels, frames, and interfaces, not just the occasional accessory
• Free ground shipping on qualifying orders
• Free tech support at 866-217-0063 — if you're not sure this is the right panel for your Nissan application, call us and we'll check before you order
• Full manufacturer warranty on every TEXA product we sell
• Honest guidance — if you need a different panel or the full RCCS system, we'll tell you that instead of just taking the order

Call 866-217-0063 for quick answers and help!