TEXA Blind Spot Cone for Toyota / Subaru / Honda — Radar Calibration Target (Art. 3908475)

This is a manufacturer-specific calibration target cone designed for blind spot and front radar calibration on Toyota, Subaru, and Honda vehicles. It is used in combination with TEXA art. S12616 and is part of the TEXA RCCS (Radar & Camera Calibration System) ecosystem — the RCCS 2, RCCS 3, or RCCS 3 EVO calibration structures.

If your shop is already running TEXA IDC5 software with a Navigator (NANO or TXT) interface and an RCCS calibration frame, this cone is the vehicle-specific piece that completes the calibration setup for Toyota, Subaru, and Honda blind spot monitoring systems and front radar sensors (used for Adaptive Cruise Control and Pre-Collision systems).

What This Calibration Target Does

• System coverage: Calibrates blind spot monitoring (BSM) corner radar and front-facing radar sensors on Toyota, Subaru, and Honda platforms.
• Required pairing: Must be used in combination with TEXA art. S12616 — this cone is not a standalone calibration kit. It is a vehicle-specific accessory within the TEXA RCCS workflow.
• Calibration trigger events: Required after blind spot sensor removal, replacement, or repositioning; after collision repair affecting rear quarter or bumper areas where BSM sensors are mounted; and after front radar R&R on applicable Toyota and Honda models.
• Software integration: Used within TEXA IDC5 ADAS calibration guided procedures — the software walks the tech through placement, distance, and vehicle alignment steps specific to each make and model.
• Laser alignment compatibility: Works with the RCCS frame's self-centering laser alignment system to ensure precise target positioning relative to the vehicle centerline.

Who Needs This

• Collision repair shops doing structural or bumper work on Toyota, Subaru, or Honda vehicles with blind spot monitoring or front radar systems.
• General repair shops that have already invested in the TEXA RCCS frame and IDC5 software and are expanding their ADAS calibration coverage to these makes.
• Dealerships and independents servicing high volumes of Toyota Camry, Corolla, RAV4, Tacoma, Subaru Outback, Forester, Crosstrek, or Honda CR-V, Accord, Civic — all common platforms requiring BSM and radar calibration after repairs.

If you do not already have the TEXA RCCS frame and the S12616 target, this cone alone will not perform a calibration. Contact us at 866-217-0063 and we will confirm exactly which RCCS configuration and target bundle your shop needs before you order.

Compatibility Note

This target is designed specifically for Toyota, Subaru, and Honda blind spot radar and Toyota/Honda front radar calibration procedures. Exact model-year coverage and calibration procedure requirements vary by vehicle — consult TEXA IDC5 for the specific guided workflow for each job. Do not substitute generic targets for OEM-specified calibration panels; radar calibration tolerances require manufacturer-matched targets to meet OEM alignment specifications.

What's Included

• TEXA blind spot cone target (art. 3908475)
• For use with TEXA art. S12616 (sold separately or as part of an RCCS bundle)

Why Buy From OEM Diagnostic Tools?

• ADAS specialists since 2016 — we stock the full TEXA RCCS ecosystem: frames, targets, software licenses, and Navigator interfaces.
• Free shipping on orders to the continental US.
• Free tech support at 866-217-0063 — our techs can confirm compatibility with your existing RCCS setup before you order.
• Full manufacturer warranty — all TEXA calibration targets are covered.
• Honest upgrade guidance — if you need the S12616 or an RCCS frame to make this work, we will tell you upfront rather than let you order a piece that sits on the shelf.

Call 866-217-0063 for quick answers and help!