TEXA Blind Spot Cone for Mitsubishi – RCCS Calibration Target (Part 3908855)

This is a manufacturer-specific calibration target for Mitsubishi blind spot monitoring (BSM) radar systems. It is used exclusively in combination with TEXA art. S12616 and is a required component when calibrating the corner/blind spot radar sensors on Mitsubishi vehicles using the TEXA RCCS 2, RCCS 3, or RCCS 3 EVO calibration structure.

What This Part Is and Why It Exists

Mitsubishi BSM radar systems require a vehicle-specific reflective cone target during the calibration procedure. The TEXA RCCS system uses OEM-defined targets — not generic panels — because each manufacturer specifies exact target geometry, reflectivity, and placement parameters. This cone is the Mitsubishi-approved target for that procedure. Without it, you cannot complete a compliant BSM calibration on covered Mitsubishi models using the TEXA platform.

Who Needs This Part

• Collision repair shops that perform rear quarter and bumper work on Mitsubishi vehicles with BSM systems — any removal or repositioning of a corner radar sensor requires post-repair calibration.
• Dealerships and independent shops already running the TEXA RCCS system that have added Mitsubishi to their service mix and need the brand-specific target to complete jobs.
• ADAS calibration specialists building out a full manufacturer coverage kit alongside the S12616 base unit.

How It Works in the TEXA RCCS Workflow

The TEXA RCCS uses a guided, software-driven calibration process through IDC5 ADAS. The technician positions the calibration structure, attaches the appropriate manufacturer target — in this case, this Mitsubishi blind spot cone — at the specified location relative to the vehicle, and follows the on-screen procedure via the TEXA Navigator (NANO S or TXT) interface. The IDC5 software walks through sensor activation, target verification, and calibration confirmation. This cone is the physical target the radar sensor is aimed at during that process.

Compatibility and Usage Notes

• Required pairing: Must be used with TEXA art. S12616. This cone is not a standalone calibration tool.
• Platform requirement: Requires a TEXA RCCS 2, RCCS 3, or RCCS 3 EVO calibration structure and IDC5 ADAS software with an active subscription.
• Vehicle coverage: Covers Mitsubishi models equipped with factory blind spot monitoring radar. Exact model-year coverage is confirmed within IDC5 ADAS — contact us or check your IDC5 vehicle coverage list for specifics.
• Calibration trigger: Required after any BSM sensor removal, rear bumper R&R, suspension or ride-height changes, or any repair that alters sensor mounting position or angle.

What's Included

• 1x TEXA blind spot calibration cone for Mitsubishi (Part 3908855)

The S12616 base unit and RCCS structure are sold separately.

Why Buy From OEM Diagnostic Tools?

• ADAS specialists since 2016 — we understand calibration systems, not just parts.
• Free shipping on orders to the contiguous US.
• Free tech support at 866-217-0063 — if you have questions about compatibility with your RCCS setup or IDC5 coverage, call us before you order.
• Full manufacturer warranty on all TEXA products.
• Honest guidance — if this isn't the right target for your vehicle or your RCCS configuration, we'll tell you.

Call 866-217-0063 for quick answers and help!