Launch Tech Radar 3 in 1 Calibration Set with Carrying Case (LAU701070015)

If your shop handles windshield replacements, collision repairs, or radar sensor R&R, you already know the headache: ACC radar calibration, blind spot monitoring calibration, and corner reflector calibration each used to require separate targets and adapters. The Launch Tech Radar 3 in 1 Calibration Set consolidates all three into a single stand — one purchase, one setup, three calibration types covered.

This is not the full ADAS frame system. It is a purpose-built radar calibration accessory designed to work alongside Launch's X-431 ADAS platform. Shops that already have the ADAS frame and software buy this kit to extend their radar calibration capability without buying redundant stands or hunting down individual targets.

What It Does — Three Radar Calibration Types, One Stand

The 3-in-1 unit handles:

• ACC (Adaptive Cruise Control) Radar Calibration: Forward-facing radar targets for front radar sensor alignment — required after windshield pulls, front-end collision repairs, or any work that disturbs the front radar module.
• Doppler Simulator Calibration: Covers blind spot monitoring and rear collision warning systems. The Doppler Simulator (LAC05-04) mimics a moving target to verify the sensor is reading correctly after replacement or realignment.
• Corner Reflector Calibration: Handles corner and rear radar systems — the sensors that feed blind spot, lane change assist, and rear cross-traffic alert. Required whenever a rear quarter panel or bumper cover is replaced or repainted.

Single-button height adjustment makes positioning the stand quick. You are not wrestling with manual height locks mid-calibration.

Who This Kit Is For

• Windshield replacement shops: ACC radar recalibration is required on almost every modern vehicle after a windshield pull. This kit gives you the correct target hardware for Launch's guided procedure.
• Collision centers: Front-end and rear-end repairs routinely disturb radar sensors. Having all three calibration target types on a single stand means less time swapping equipment between bays.
• General repair shops expanding into ADAS: If you already run an X-431 ADAS Pro Plus, ADAS Mobile Plus, or ADAS HD, this kit is the most efficient way to add radar calibration to your service menu without buying three separate stands.

What's in the Box — Complete Contents

• 3-IN-1 Main Unit — the adjustable stand
• ACC Radar Target (LAM05-02)
• Doppler Simulator (LAC05-04)
• Corner Reflector
• Mounting Adapter for ACC Radar Target
• 3.5mm Single Hex (6PT) Socket Tool
• Five-line Laser Device (LAM09-01)
• Power Adapter
• Plumb Line (LAM09-06)
• Laser Reflector (LAM09-03)
• Auxiliary Mirror (LAM09-04)
• Tape Measure
• Positioning Bracket (LAM09-05)
• Cross Stickers (10)
• Travel/Storage Case
• User Manual
• Activation PIN Card

Everything required to execute guided radar calibrations through a compatible Launch scan tool is included. The travel/storage case means the kit is protected between jobs and ready to go if you run a mobile ADAS service.

Compatible Launch Scan Tools

This kit is designed to work with the following Launch platforms:

• X-431 ADAS Pro Plus
• X-431 ADAS Mobile Plus
• X-431 ADAS HD
• Throttle V
• Torque Link
• Turbo III

If you are running a different scan tool platform or are unsure whether your current equipment supports this calibration set, call us before ordering. We will confirm compatibility for your specific setup.

Where This Fits in the Launch ADAS Lineup

The Radar 3 in 1 Calibration Set (LAU701070015, Part No. 701070015) is a standalone radar accessory — it does not replace the full ADAS frame system. Here is how it fits:

• Need radar calibration only: This kit, paired with a compatible Launch scan tool you already own, covers ACC, blind spot/rear collision Doppler, and corner reflector calibration.
• Need full ADAS capability (cameras + radar): You need the complete Launch X-431 ADAS system with the main frame, then add this radar set for complete coverage. Contact us to spec out the full configuration.
• Already have the full ADAS frame: This kit is the direct add-on to expand your radar calibration target library without duplication.

At $3,360.00 (MSRP $4,495.95), this kit prices out significantly below buying the three target types separately. The carrying case also adds real value for shops that move the equipment between bays or run mobile operations.

Why Buy From OEM Diagnostic Tools?

• Specialist since 2016 — We focus exclusively on professional diagnostic and ADAS equipment. We know this product line and can answer technical questions before and after the sale.
• Free shipping on this order.
• Free tech support at 866-217-0063 — Call us when you are setting up for the first time or if a calibration procedure raises a question mid-job.
• Full manufacturer warranty — Covered under Launch Tech USA's warranty terms. We handle warranty issues directly.
• Honest upgrade guidance — If this kit is not the right fit for your shop's workflow, we will tell you what is. We would rather lose a sale than put the wrong equipment in your bay.

Call 866-217-0063 for quick answers and help!