Autel MaxiSYS ADAS Calibration Package — Full-Shop ADAS Calibration for Cameras, Radar, and Driver Assistance Systems

If your shop handles windshield replacements, front-end repairs, or collision work, you already know the problem: every modern vehicle that leaves your bay with a replaced windshield, a touched suspension, or a swapped radar unit needs its ADAS systems recalibrated before it goes back on the road. The Autel MaxiSYS ADAS Calibration Package gives you the hardware and software to do that work in-house, correctly, on a wide range of makes and models — without sending the customer to the dealer or a specialist across town.

What This Package Includes

The MaxiSYS ADAS Package is built around Autel's CSC (Calibration Standard Components) frame system — the same platform used by dealer technicians and independent calibration specialists. The package brings together the calibration frame, vehicle-specific targets, and the MaxiSYS diagnostic software environment needed to execute both static and dynamic calibration procedures.

• CSC Calibration Frame: The adjustable target-mounting frame that positions calibration panels at the precise distances and angles required by OEM procedures. Adjusts for different vehicle widths and target heights.
• Vehicle-Specific Calibration Targets: Pattern boards, radar reflectors, and camera alignment panels required for static calibration of front cameras, adaptive cruise radar (ACC), night vision sensors, surround-view (AVM) systems, and blind-spot monitoring.
• MaxiSYS Diagnostic Tablet Integration: The package is designed to work with the MaxiSYS Ultra, MS909, MS919, or Elite II tablet running Autel's ADAS software module. (Confirm tablet compatibility and which tablet is included with your specific package configuration before ordering — contact us if uncertain.)
• Static and Dynamic Calibration Support: Target-based static calibration is done in the bay. Dynamic calibration (road-drive with the tablet connected) is supported for systems that require a drive cycle to complete the procedure.
• ADAS Software Module: Guided, vehicle-specific calibration workflows walk technicians through each step — target placement, distance setup, sensor alignment, and verification — reducing the chance of procedural errors.

Which Systems This Covers

• Forward-Facing Cameras: Lane departure warning, lane keep assist, automatic emergency braking (AEB), traffic sign recognition
• Adaptive Cruise Control Radar (ACC): Front radar sensors for stop-and-go and highway cruise systems
• Night Vision: Infrared camera calibration on supported vehicles
• Surround-View / AVM Systems: 360-degree camera alignment for parking assist
• Blind-Spot Monitoring (BSM): Rear-corner radar calibration

Vehicle coverage spans domestic, Asian, and European makes. Exact model-year coverage for a specific vehicle or system is available on request — contact us before purchasing if you have a specific fleet or vehicle type in mind.

When Does a Shop Need This?

• Windshield Replacement Shops: Every modern vehicle with a camera mounted to the windshield needs static recalibration after glass replacement. Without it, the forward camera is misaligned and safety systems operate incorrectly. This package pays for itself quickly in a high-volume glass shop.
• Collision Repair Centers: Front-end impacts, bumper replacements, grille work, and suspension repairs all require ADAS recalibration. A body shop without calibration capability either turns away work or pays a sublet fee every time.
• General Repair Shops: Suspension work, alignment, and steering repairs on newer vehicles increasingly trigger ADAS recalibration requirements. Having this in-house means you capture that labor instead of sending it out.
• Independent ADAS Calibration Specialists: If calibration is your business, the Autel system gives you a broad-coverage, portable solution that works across the vehicle mix you see day to day.

How the Calibration Workflow Runs

1. Pull the vehicle into a flat, level bay with adequate lighting and clear space around the vehicle (OEM-specified distances vary by make and system — the software guides you).
2. Connect the MaxiSYS tablet to the vehicle via OBD-II.
3. The ADAS software identifies the vehicle and pulls the correct calibration procedure, target type, and positioning requirements.
4. Set up the CSC frame and mount the correct target panels at the software-specified position.
5. Execute the calibration. The system reads sensor feedback, confirms alignment, and flags any errors.
6. For dynamic procedures, follow the road-drive instructions with the tablet connected until the system confirms completion.
7. Print or save the calibration report for the repair order.

Package Configuration and Pricing

The MaxiSYS ADAS Calibration Package is priced at $3,256.88. This package is designed for shops that need a complete, ready-to-use ADAS calibration setup without sourcing individual components separately. If you already own a compatible MaxiSYS tablet, or need a different target set for a specialized vehicle mix, contact us — we can help you identify the right configuration and avoid paying for components you already have.

For shops evaluating the IA900WA (the combined wheel alignment and ADAS platform) or the MA600 mobile frame, call us. Those are different product lines with different use cases, and the right choice depends on your volume, bay setup, and whether alignment is part of the service you're offering alongside calibration.

Why Buy From OEM Diagnostic Tools?

• Specialist since 2016 — We focus exclusively on professional diagnostic and calibration equipment. We know this product line and can tell you honestly whether it fits your shop.
• Free shipping on this order.
• Free tech support at 866-217-0063 — Call us when you're setting up the system, when you hit a procedure question, or when a calibration isn't behaving as expected.
• Full manufacturer warranty — Autel factory warranty applies. We handle warranty support.
• Honest upgrade guidance — If a different package or a different Autel ADAS product is a better fit for your shop, we'll tell you before you buy, not after.

Call 866-217-0063 for quick answers and help!