Launch Tech USA X-431 ADAS Mobile Plus LDW Standard Package (with Carry Bag)

The X-431 ADAS Mobile Plus LDW Standard Package is a professional static ADAS calibration system built for shops that regularly perform windshield replacements, front camera R&R, and front-end or suspension work that disturbs camera alignment. If your shop does glass work or collision repair and you're not yet recalibrating ADAS systems, you're either turning away that liability or handing it off to someone else. This package lets you bring that work in-house at a professional level.

The "Mobile Plus" designation means the calibration frame is foldable and portable — you're not bolting a fixed frame to the floor. It breaks down for transport between bays or locations, and sets up without permanent installation. The "LDW Standard" configuration means this package is loaded for Lane Departure Warning calibration out of the box, with the target set appropriate for the brands covered under the standard target package.

What's in the Package

• X-431 ADAS Mobile Frame: Foldable calibration frame with integrated five-line and cross laser instrument for high-precision vehicle and target alignment
• LDW Calibration Targets: Standard package target set for lane departure warning camera calibration — brand-specific targets for covered vehicle makes
• Wheel Clamps: Vehicle positioning clamps that mount to the wheel rim to establish the vehicle centerline and set target distance accurately
• Radar Reflector: For ACC (Adaptive Cruise Control) radar calibration where supported
• Carry Bag: Hard or structured carry bag for transporting the full system — keeps targets flat and frame components organized
• ADAS Software: Launch ADAS calibration software with guided workflows by vehicle and system type

Who Needs This System

This package is built for three types of shops:

• Auto glass shops that replace windshields on vehicles with forward-facing cameras — every OEM with a forward camera requires recalibration after glass R&R, and most states and insurers now expect documentation that it was done
• Collision repair shops handling front-end damage where radar modules, camera brackets, or structural components were disturbed — calibration is required before the vehicle leaves the shop
• General repair shops with sufficient volume in late-model vehicles to justify bringing ADAS calibration in-house rather than subcontracting it or sending vehicles to the dealer

At $8,999.99, this is a professional-grade system. The question isn't whether you can afford it — it's whether your current ADAS calibration volume (or the volume you're turning away) justifies the investment. Shops doing five or more ADAS calibrations per month typically recover the cost within the first year when they account for subcontract fees and dealer referrals they're currently losing.

Calibration Workflow Overview

Launch's X-431 ADAS Mobile system uses a guided static calibration process. You position the vehicle in the bay, attach the wheel clamps to establish centerline, use the laser instrument to align the frame to the vehicle, place the appropriate target panel at the software-specified distance and height, and run the calibration through the ADAS software connected to the vehicle's scan tool. The software walks the technician through each step by vehicle make, model, and system type.

The five-line and cross laser instrument on the Mobile frame is what separates this from lower-cost systems — accurate target placement requires precise vehicle-to-frame alignment, and the laser makes that repeatable without guesswork.

LDW Standard vs. Other Configurations

• LDW Standard (this package): Core target set for lane departure warning calibration across the standard covered vehicle range — appropriate for shops with broad general repair volume
• Pro Plus / Mobile Plus configurations: Expanded target sets for additional vehicle brands, AVM (around-view monitoring), and RCW (rear collision warning) — for shops with heavier European import volume or collision work requiring full surround-camera coverage
• Premium / Deluxe packages: Comprehensive target libraries for shops needing the widest possible brand and system coverage without ordering targets separately

If you're not sure which configuration fits your vehicle mix, call us. We can pull up the target coverage list and match it to the makes you're actually seeing in your bays.

Key Technical Notes

• Static calibration only — this system does not perform dynamic (drive-cycle) calibration; some vehicles require dynamic calibration in addition to or instead of static
• Requires adequate bay space — minimum bay depth and width requirements apply; contact us for specifics based on your facility
• Compatible with Launch X-431 Throttle Professional scan tool for integrated scan-and-calibrate workflow; check current software compatibility for your existing Launch tool
• Software updates and vehicle coverage expansion are managed through Launch's ADAS software platform
• Some vehicle makes and models may require brand-specific targets not included in the Standard package — additional LAC-series targets are available separately

Why Buy From OEM Diagnostic Tools?

• Specialist since 2016 — we sell diagnostic and calibration equipment exclusively, not general shop supplies
• Free ground shipping on this order
• Free tech support at 866-217-0063 — our staff can walk you through setup, software questions, and help you identify if you need additional targets for specific vehicles
• Full manufacturer warranty — covered through Launch Tech USA's warranty program
• Honest upgrade guidance — if the Standard package won't cover your vehicle mix, we'll tell you before you order, not after

Call 866-217-0063 for quick answers and help!