Launch Tech USA Volkswagen Around View Monitoring Target Mat

The Launch Tech USA Volkswagen Around View Monitoring (AVM) Target Mat (LAU301250037) is a vehicle-brand-specific calibration accessory for shops performing static ADAS calibration on Volkswagen models equipped with around-view monitoring systems. This target mat works within the Launch X-431 ADAS calibration ecosystem and is designed to be used on a flat shop floor alongside the X-431 ADAS Mobile calibration frame or a compatible Launch calibration stand.

AVM systems use multiple wide-angle cameras — typically mounted at the front grille, rear bumper, and side mirrors — to stitch together a bird's-eye view of the vehicle surroundings. When any of these cameras are disturbed during a bumper R&R, mirror replacement, wheel alignment, or suspension work, all cameras in the AVM system require recalibration to maintain accurate image stitching and boundary accuracy. This mat provides the reference pattern the X-431 ADAS software uses to align and calibrate the AVM cameras to Volkswagen factory specification.

What This Target Mat Does

• Vehicle-Specific Pattern: Designed specifically for Volkswagen AVM calibration — the pattern geometry matches the calibration requirements of VW's around-view monitoring system, not a generic substitute.
• Floor-Based Static Calibration: Laid flat on the shop floor in the prescribed positions around the vehicle. The X-431 ADAS software guides placement and provides pass/fail feedback once the cameras lock onto the pattern.
• Part of the X-431 ADAS Ecosystem: Compatible with the Launch X-431 ADAS Mobile frame and X-431 ADAS calibration software. This mat does not function as a standalone tool — it requires the full Launch ADAS setup to perform calibration.
• Durable Mat Construction: Built to lie flat and hold its pattern geometry accurately on a shop floor. Exact dimensions and material spec are available on request.

When Does a Shop Need This Mat?

If you're doing VW bumper work, mirror replacements, or any repair that disturbs the AVM cameras, you need to recalibrate. Returning the vehicle without calibration after camera disturbance means the AVM system is feeding the driver inaccurate imagery — a genuine safety and liability issue. This mat is what makes that calibration possible with Launch equipment.

• Bumper replacements or repairs (front or rear) that disturb camera mounting
• Mirror replacements on VW models with side-mounted AVM cameras
• Wheel alignments or suspension repairs where camera aim may have shifted
• Post-collision repairs involving any panel or component near AVM camera locations
• Windshield replacements on models with front-facing AVM components

Compatibility

This target mat is designed for Volkswagen vehicles equipped with factory around-view monitoring systems. Exact model-year and trim coverage depends on which VW models included AVM as standard or optional equipment — contact us with your specific vehicle application and we can confirm fit before you order.

What's Included

• 1x Volkswagen AVM calibration target mat (LAU301250037)

Note: This mat requires the Launch X-431 ADAS Mobile frame, wheel clamps, and X-431 ADAS calibration software to perform a complete calibration. It is an accessory within the Launch ADAS ecosystem, not a complete calibration kit.

Who Should Buy This

This mat is the right purchase for a shop that already owns the Launch X-431 ADAS calibration system and either specializes in VW/Audi work or sees enough VW volume to justify a dedicated VW AVM mat. If you're just getting into ADAS calibration, you'll want to start with a complete Launch ADAS kit — the mat alone won't get you there. If you already have the Launch setup and are adding VW AVM coverage, this is the piece you need.

Why Buy From OEM Diagnostic Tools?

• ADAS Specialists Since 2016: We stock the full Launch ADAS ecosystem — frames, targets, mats, and software — and can help you configure the right setup for your shop.
• Free Shipping: No freight surprises on orders shipped within the contiguous US.
• Free Tech Support: Call 866-217-0063 and talk to someone who actually understands Launch ADAS calibration workflows.
• Full Manufacturer Warranty: Backed by Launch Tech USA's warranty through an authorized dealer.
• Honest Buying Guidance: Not sure if this mat covers your VW applications or which Launch ADAS kit fits your shop? We'll tell you straight — no upsell pressure.

Call 866-217-0063 for quick answers and help!