Launch Tech USA Radar 3 in 1 (ACC + Doppler + Corner Reflector) Set with Bags

The Launch Tech Radar 3-in-1 (part number 701070015) is a single calibration stand that handles three distinct radar calibration targets: an ACC radar reflector for forward-facing adaptive cruise control sensors, a Doppler simulator for OEM procedures that require a simulated moving-object signal, and a corner reflector for blind spot monitoring (BSM) and rear cross-traffic alert (RCTA) sensors. Instead of buying and storing three separate calibration setups, your shop gets one compact stand with interchangeable targets and a travel case built for mobile and in-shop use alike.

At $4,399.99, this sits well below the X-431 ADAS PRO PLUS and ADAS Mobile Plus systems ($9,995–$14,495 range). It is the right choice for a collision center or repair shop that needs to handle radar calibration work without building out a full ADAS calibration bay.

Who Needs This Unit

If your shop is doing any of the following, radar calibration is required — and this stand covers the three most common target types you will encounter:

• Front-end and bumper repairs — any time the bumper or bumper cover is removed or replaced, the forward-facing radar sensor's alignment must be verified and recalibrated.
• Radar sensor R&R — replacing or repositioning a radar module requires a post-installation static calibration before the vehicle is returned to the customer.
• Collision repairs affecting sensor mounting — frame or structural work near radar sensor locations can shift the sensor's aim and invalidate the previous calibration.
• Suspension and alignment work — certain OEMs require radar recalibration after alignment corrections that exceed defined tolerances.
• BSM and RCTA sensor service — corner reflector target is specifically for rear-corner radar sensors used in blind spot and cross-traffic systems, which are separate from the front ACC radar.

What the Three Targets Do

• ACC Radar Target (LAM05-02) — A static reflector plate used during forward radar calibration. The vehicle is positioned a precise distance from the target on level ground, and the Launch diagnostic tool guides the calibration procedure. This is the most frequently used target for adaptive cruise control and autonomous emergency braking systems.
• Doppler Simulator (LAC05-04) — Some OEM calibration routines require the radar to detect a simulated moving object rather than a static reflector. The Doppler simulator generates that signal, making it possible to complete procedures that cannot be done with a static target alone.
• Corner Reflector — Positioned at the rear corners of the vehicle to calibrate BSM and RCTA radar sensors. These sensors are separate from the front-facing ACC radar and require their own calibration target and procedure.

Stand Features

• Single-button height adjustment — Set target height without tools. The adjustment mechanism is designed for quick changes between target types and vehicle configurations.
• Interchangeable targets — All three calibration targets mount to the same stand. No separate tripods or frames required.
• Lightweight and portable — Built for collision centers that need to move the stand around the shop floor or take it on mobile service calls.
• Travel and storage cases included — The full set ships with protective bags for the stand and accessories, keeping everything organized and protected during transport.

What Is in the Box

• 3-IN-1 Main Unit
• ACC Radar Target (LAM05-02)
• Doppler Simulator (LAC05-04)
• Corner Reflector
• Mounting Adapter for ACC Radar Target
• 3.5mm Single Hex (6PT) Socket Tool
• Five-line Laser Device (LAM09-01)
• Power Adapter
• Plumb Line (LAM09-06)
• Laser Reflector (LAM09-03)
• Auxiliary Mirror (LAM09-04)
• Tape Measure
• Positioning Bracket (LAM09-05)
• Cross Stickers (10)
• Travel/Storage Case with Bags
• User Manual
• Activation PIN Card

Compatible Launch Diagnostic Tools

• Professional diagnostic platforms: Throttle V, Torque Link, Turbo III
• ADAS systems: X-431 ADAS PRO PLUS, X-431 ADAS MOBILE PLUS, X-431 ADAS HD, RADAR 3-IN-1

The stand is designed to work within the Launch ADAS calibration workflow — the diagnostic tool guides the procedure, and this stand provides the physical targets the software calls for. Exact vehicle coverage varies by the connected diagnostic platform. Contact us for compatibility questions on specific makes, models, or OEM radar systems.

Where This Fits in the Launch ADAS Lineup

• Radar 3-in-1 — $4,399.99 (our price, vs. $4,495.95 MSRP) — This unit. Three radar targets on one stand. Right for shops focused on radar-specific calibration work without needing a full camera and sensor suite.
• X-431 ADAS HD — $9,995.00 — Full ADAS calibration system covering cameras, radar, and additional sensor types. For shops with higher ADAS volume or broader OEM requirements.
• X-431 ADAS Mobile Plus — $9,995.99–$14,495.99 — Mobile ADAS calibration configuration designed for shops that run mobile ADAS service or need greater portability across locations.
• X-431 ADAS PRO PLUS — Contact us for current pricing. Broader target coverage for high-volume ADAS shops.

When the Radar 3-in-1 Is the Right Call

This stand makes sense for a collision shop or independent repair facility that is already doing radar R&R and bumper work and needs a reliable, portable calibration target set that does not require a dedicated ADAS bay. If your current diagnostic platform is a Launch Throttle V, Torque Link, Turbo III, or an X-431 ADAS system, the Radar 3-in-1 integrates directly into that workflow.

If your shop is also calibrating cameras, lidar, or a broader set of ADAS sensors, the X-431 ADAS HD or ADAS Mobile Plus may be a better fit. We can walk through the comparison based on your OEM mix and monthly volume.

Why Buy From OEM Diagnostic Tools?

• ADAS specialist since 2016 — we know the Launch lineup end-to-end and can tell you exactly which configuration fits your shop.
• Free shipping on this unit to the lower 48 states.
• Free tech support — call us at 866-217-0063 and talk to someone who has actually used this equipment.
• Full manufacturer warranty — we handle warranty claims directly so you are not on your own if something goes wrong.
• Honest upgrade guidance — if the Radar 3-in-1 is not the right fit for your shop's volume or OEM mix, we will tell you, and point you toward the right configuration.

Call 866-217-0063 for quick answers and help!