Launch Tech USA Nissan Around View Monitor 2 Target Mat — ADAS Calibration Accessory for Nissan AVM Systems

If your shop handles Nissan vehicles and you're doing any work that disturbs the Around View Monitoring cameras — mirror R&R, panel replacement, windshield work, or suspension and alignment changes — you need the correct brand-specific target mat to complete the calibration. The LAU301250036 is the Nissan Around View Monitoring 2 Target Mat, a vehicle-brand-specific calibration accessory designed to work within the Launch X-431 ADAS calibration ecosystem.

AVM systems use multiple wide-angle cameras (typically four) mounted at the front, rear, and both sides of the vehicle to stitch together a bird's-eye composite view. After any camera is disturbed or replaced, the system requires a static calibration using the correct target pattern. Using a generic mat or skipping calibration entirely will leave the composite image misaligned — customers will see seam artifacts, distorted overlays, or a system fault. This mat eliminates that problem for Nissan AVM 2 applications.

What This Target Mat Does

• Vehicle-Specific Pattern: Printed with the exact calibration pattern required by Nissan's Around View Monitoring 2 system. The pattern geometry is matched to Nissan's OEM calibration specification — not a universal approximation.
• Static Calibration Support: Used during static ADAS calibration procedures. The mat is positioned around the vehicle per the X-431 ADAS software's guided setup, which specifies exact placement distance and orientation.
• Part of the Launch LAC/AVM Ecosystem: Designed to integrate with the Launch X-431 ADAS frame and calibration software. The software walks the technician through positioning, then communicates with the vehicle to execute and confirm the calibration.
• Durable Printed Surface: The mat must lay flat and hold its pattern accurately — distortion or folding defeats the purpose. Exact material and dimension specs are available on request; contact us before ordering if you have specific size or storage requirements.

When Is This Mat Required?

• Side Mirror Replacement: Many Nissan AVM systems mount one or more cameras in the mirror housing. Any mirror R&R that disturbs camera aim requires post-repair calibration.
• Rear Camera Work: Tailgate or bumper replacements affecting the rear AVM camera trigger a calibration requirement.
• Front Camera or Bumper Work: Front fascia R&R or any work near the front AVM camera.
• Wheel Alignment or Suspension Repairs: Changes to ride height or corner geometry affect camera aim angles and may require AVM recalibration per Nissan's procedures.
• Any ADAS Reset or Reinitialize: If the AVM system has been reset via scan tool, calibration with the correct target mat is required before returning the vehicle.

Nissan AVM System Coverage

This mat is specific to Nissan's Around View Monitoring 2 system. Exact model-year coverage depends on which Nissan platforms equipped AVM 2 — this varies by trim and market. If you are unsure whether a specific Nissan model/year uses AVM 2 versus an earlier or later revision, call us before ordering. Using the wrong-generation mat will result in a failed calibration.

For shops that service multiple Nissan AVM generations, or that also work on Infiniti vehicles (which share platform architecture with Nissan), additional target mats may be required. We can help you identify the full set your shop needs.

Required Equipment

This mat does not function as a standalone calibration kit. To perform the calibration, you also need:

• Launch X-431 ADAS Calibration Frame — the main frame with adjustment columns and target mounting hardware
• Launch X-431 ADAS Software — guides the procedure and communicates with the vehicle ECU
• Compatible Launch Scan Tool — the X-431 Throttle Professional or equivalent with ADAS software capability
• Wheel Clamps and Alignment Targets — for proper frame positioning relative to the vehicle

If you are building out a new ADAS calibration capability and don't yet have the frame and scan tool, call us. We'll walk you through the correct configuration for your shop's vehicle mix and budget.

Why Buy From OEM Diagnostic Tools?

• ADAS Specialists Since 2016: We've sold and supported Launch ADAS systems across hundreds of shops. We know which mats go with which systems and which configurations actually cover your vehicle mix.
• Free Shipping: All orders ship free — no surprise freight charges on accessory orders.
• Free Technical Support: Call 866-217-0063 with questions about compatibility, calibration procedures, or which additional mats your shop needs. We answer.
• Full Manufacturer Warranty: Covered under Launch Tech USA's standard warranty. If there's a defect, we handle it.
• Honest Guidance: If this mat isn't the right one for your application, we'll tell you. We'd rather lose a $247 sale than send you the wrong part.

Call 866-217-0063 for quick answers and help!