Bosch CTA212-1 Nissan ADAS Calibration Target Board

The Bosch CTA212-1 is the Nissan-specific static calibration target board for the Bosch DAS 3000 ADAS recalibration system. If your shop does windshield replacements, front-end repairs, or camera R&R on Nissan vehicles, this target board is what gets mounted to the DAS 3000 fixture to give the forward-facing camera a verified reference pattern to calibrate against. Without the correct manufacturer-specific target, the DAS 3000 cannot complete a static calibration on Nissan platforms — you either need this board or you're sending the vehicle to the dealer.

What This Target Does

Static ADAS calibration requires placing a precisely printed, manufacturer-specified target board at a defined distance and angle in front of the vehicle. The camera ECU looks at that pattern and uses it to verify or reset its field-of-view parameters. The CTA212-1 is engineered to Nissan's published calibration specifications — the pattern geometry, sizing, and contrast ratios match what Nissan's camera system expects to see. Using a generic or incorrect target produces either a failed calibration or, worse, a calibration that passes the tool check but leaves the camera misaligned in the real world.

How It Fits Into the DAS 3000 Workflow

• Mounts to the DAS 3000 frame: The CTA212-1 attaches directly to the Bosch DAS 3000 recalibration fixture, which handles positioning via wheel-hub thrust-angle markers and on-screen guided placement instructions.
• Used with Bosch ADS 525X or 625X: The scan tool initiates the calibration routine and communicates with the vehicle's ADAS control module throughout the procedure.
• Pairs with BAP System when required: For vehicles or procedures that require the Bosch ADAS Positioning system, the DAS 3000 frame and this target work alongside it.
• Static calibration only: This target is for stationary calibration procedures performed in the shop. Dynamic calibration (drive-based) is a separate process handled through the scan tool without a target board.

When You Need This Target

• Windshield replacement on equipped Nissan models: Any Nissan with a forward-facing camera mounted to or near the windshield requires static recalibration after glass R&R. This is the target for that procedure.
• Camera removal and reinstall: Any time the camera unit is physically removed — whether for repair, replacement, or access to other components — recalibration is required before returning the vehicle to service.
• Front-end collision repair: Suspension geometry changes, bumper R&R, or any repair that could affect camera mounting angle or vehicle ride height may require recalibration. Check OEM repair procedures for the specific threshold.
• Camera bracket or mount replacement: If the bracket the camera mounts to is replaced, the camera's physical orientation relative to the vehicle has changed. Static recalibration with this target is the correct fix.

What's Included

• CTA212-1 Nissan2 ADAS calibration target board
• Designed for use with the Bosch DAS 3000 recalibration fixture

Note: The DAS 3000 frame, ADS scan tool, and BAP system are sold separately. Confirm your DAS 3000 system is complete before ordering this target board. If you're building out a DAS 3000 setup and need guidance on the full system configuration for your shop's vehicle mix, call us — we can help you identify which target boards you actually need versus which ones you can skip.

Nissan Vehicle Coverage

The CTA212-1 covers Nissan models equipped with forward-facing camera-based ADAS systems. Exact model-year and trim-level coverage depends on which vehicles in your market were equipped with the relevant camera systems. For confirmed vehicle applicability, reference the Bosch ADAS application guide or contact our tech support line — we'd rather tell you it doesn't fit before you buy than after.

Why Buy From OEM Diagnostic Tools?

• Specialist since 2016: We focus exclusively on professional diagnostic equipment. We know the Bosch DAS 3000 ecosystem and can help you configure a complete system for your shop.
• Free shipping: No handling fees, no surprises at checkout.
• Free tech support: Call 866-217-0063 and talk to someone who actually understands ADAS calibration workflows, not a general customer service rep reading from a script.
• Full manufacturer warranty: Every Bosch product we sell carries the full Bosch warranty. No grey-market sourcing.
• Honest guidance: If you need a different target board for your vehicle mix, or if this board isn't the right fit for your current DAS 3000 configuration, we'll tell you.

Call 866-217-0063 for quick answers and help!