Bosch CTA210-1 ADAS Camera Calibration Target — Mercedes-Benz MB1

The Bosch CTA210-1 is a vehicle-specific camera calibration target board designed for use with the Bosch DAS 3000 ADAS recalibration system. This target is built for Mercedes-Benz applications (MB1 configuration) and is used during static forward-facing camera calibration after windshield replacement, camera removal and reinstallation, or any front-end or suspension repair that disturbs the camera's aim angle.

If your shop handles Mercedes-Benz windshield R&R, collision repair, or suspension work, you need the correct target board for the brand. Using the wrong target produces incorrect calibration data — the system will either reject it outright or, worse, complete the procedure with bad results. The CTA210-1 is the right board for MB1-designated Mercedes-Benz vehicles on the DAS 3000 frame.

How It Fits the DAS 3000 Workflow

The DAS 3000 ADAS recalibration frame holds radar reflectors and camera target boards in precise position using distance markers, wheel-hub thrust-angle alignment guides, and on-screen technician instructions. The CTA210-1 mounts to the frame in the correct position for Mercedes-Benz MB1 camera geometry. The scan tool — either a Bosch ADS 525X or ADS 625X — drives the calibration sequence and reads the camera's confirmation that the target has been recognized and the calibration is complete.

Without the correct target board, none of that works. The DAS 3000 frame, the BAP positioning system, and the scan tool are all useless for this vehicle group if you are missing the MB1-specific target.

Who Needs This Target

• Auto glass shops performing windshield replacement on Mercedes-Benz vehicles with forward-facing cameras — calibration is required by OEM procedure after every windshield pull
• Collision repair shops handling Mercedes-Benz front-end work, hood repairs, or any job that moves or removes the camera module
• General repair shops that already own the Bosch DAS 3000 system and are adding Mercedes-Benz to their ADAS calibration menu
• Mobile ADAS calibration technicians building out a complete target library for the DAS 3000

Key Details

• SKU: BOSCTA210-1
• Application: Mercedes-Benz MB1 camera calibration (exact vehicle coverage available on request — confirm your model year and camera system before ordering)
• System compatibility: Bosch DAS 3000 ADAS recalibration frame
• Scan tool required: Bosch ADS 525X or ADS 625X (sold separately)
• Calibration type: Static forward-facing camera
• Price: $599.99

What's in the Box

• CTA210-1 MB1 camera calibration target board
• Mounting hardware for DAS 3000 frame (confirm with Bosch documentation for your frame revision)

Important Notes Before Ordering

The CTA210-1 is a target board only — it does not include the DAS 3000 frame, the Bosch ADAS Positioning (BAP) System, or the required scan tool. If you are building out a DAS 3000 setup from scratch, call us and we will walk you through the complete system configuration for your vehicle mix. There is no point buying targets before confirming the rest of the system is in place and configured correctly.

Exact vehicle-year coverage for the MB1 designation should be verified against the Bosch ADAS application database or confirmed with our tech staff before purchase. Mercedes-Benz model-year cutoffs for MB1 vs. other target configurations are not always obvious from the vehicle's trim level alone.

Why Buy From OEM Diagnostic Tools?

• Specialist since 2016 — we focus exclusively on professional diagnostic and ADAS equipment, not general tool catalogs
• Free ground shipping on qualifying orders
• Free tech support at 866-217-0063 — our staff can help confirm compatibility, walk through DAS 3000 system requirements, and advise on target library build-out
• Full manufacturer warranty on every product we sell
• Honest upgrade guidance — if this target is not right for your vehicle mix, we will tell you before you order, not after

Call 866-217-0063 for quick answers and help!