Bosch CTA205-1 Honda3 ADAS Camera Target Board

The Bosch CTA205-1 is the Honda-specific static calibration target board for the Bosch DAS 3000 ADAS recalibration system. If your shop replaces windshields, performs front-end collision repairs, or removes and reinstalls forward-facing cameras on Honda vehicles, this is the target board you need to complete the job correctly before the car leaves your bay.

Static ADAS calibration requires precision targets — not a printout taped to the wall. The CTA205-1 mounts directly to the Bosch DAS 3000 calibration frame and presents the exact pattern geometry that Honda's forward camera system expects to see during the recalibration sequence. Without the correct target board, the calibration procedure either fails outright or — worse — completes with errors that go undetected until the system behaves unpredictably on the road.

What This Target Board Does

• Honda-Specific Pattern: Engineered to the pattern geometry required by Honda forward-facing camera systems for static recalibration. Not a universal target — Honda's calibration software validates the specific target design.
• DAS 3000 Frame Compatible: Mounts directly to the Bosch DAS 3000 recalibration fixture. The frame handles positioning, distance, and thrust-angle alignment; this board provides the visual reference the camera locks onto.
• Static Calibration Use: Used for static (in-bay) calibration procedures. The vehicle is stationary; the frame and target are positioned according to the guided on-screen instructions from the paired Bosch scan tool.
• Works with Bosch ADS 525X / 625X: The DAS 3000 ecosystem pairs with these scan tools for guided calibration. The scan tool walks the technician through placement and alignment; the target board is the physical element the camera calibrates to.
• Required After Windshield R&R, Camera R&R, or Front-End Work: Any time the Honda camera system is disturbed — windshield out, camera unbolted, suspension or steering geometry changed — a static calibration with the correct target is required before the ADAS system is considered operational.

Who Needs This Target Board

This target is for shops already running the Bosch DAS 3000 system that work on Honda vehicles with factory ADAS. If you're doing volume windshield work, collision repair, or you're a Honda/Acura specialist, keeping this target on your DAS 3000 frame means you're not turning away Honda ADAS calibration jobs or sending customers down the road to a dealer.

If you don't yet have the DAS 3000 frame, this target board is one piece of a larger system. Call us and we'll walk you through what the complete setup looks like for your shop's volume and vehicle mix.

Important Notes

• Exact Honda model year and trim coverage depends on the calibration software version paired with your DAS 3000 system. Coverage details are available on request — do not assume blanket coverage across all Honda models without verifying with your scan tool's vehicle coverage list.
• This is an accessory/target board only. The Bosch DAS 3000 frame, BAP positioning system, and compatible scan tool are sold separately.
• Handle the target board surface with care. Scratches, warping, or contamination on the target face can introduce calibration errors. Store flat, away from direct sunlight.

Why Buy From OEM Diagnostic Tools?

• Specialist since 2016 — we sell diagnostic and ADAS calibration equipment, not general tools. Our staff understands the Bosch DAS 3000 ecosystem and can help you figure out exactly what your shop needs.
• Free ground shipping on qualifying orders.
• Free tech support at 866-217-0063 — if you have questions about compatibility, coverage, or fitting this into your calibration workflow, call us.
• Full manufacturer warranty on every product we sell.
• Honest upgrade guidance — if this target board isn't the right fit for your situation, we'll tell you that instead of just taking your money.

Call 866-217-0063 for quick answers and help!