Bosch CTA218 Nissan and Infiniti ADAS Target Boards for DAS 3000

If your shop handles Nissan or Infiniti vehicles and you're doing windshield replacements, front camera removals, or any front-end suspension work, you already know that ADAS recalibration is no longer optional. The Bosch CTA218 target board set is the vehicle-specific calibration target designed for use with the Bosch DAS 3000 ADAS recalibration fixture. Without the right target boards, you cannot perform static camera calibration on these vehicles — and without calibration, you're sending a driver out with a lane-departure system, automatic emergency braking, or forward-collision warning that may not function correctly.

What the CTA218 Target Boards Do

Static ADAS calibration requires precise placement of a target board in front of the vehicle at a defined distance and angle. The DAS 3000 frame holds these boards in position while the Bosch ADS 525X or ADS 625X scan tool guides the technician through the recalibration sequence. The CTA218 boards are engineered specifically for Nissan and Infiniti camera systems — the pattern geometry, sizing, and reflectivity are matched to what those vehicles' forward-facing cameras expect to see during calibration. Using a generic or mismatched target will produce a failed or inaccurate calibration result.

When You Need These Boards

• Windshield replacement: Any windshield R&R on a Nissan or Infiniti with a forward-facing camera mounted to the glass requires post-installation camera recalibration before the vehicle leaves the shop.
• Camera removal or reinstall: If the camera bracket, mounting hardware, or the camera unit itself was disturbed, recalibration is required.
• Front-end collision repair: Bumper cover R&R, radiator support work, or any repair that may shift the relationship between the camera and vehicle centerline triggers a recalibration requirement.
• Suspension alignment work: Certain Nissan and Infiniti models require camera recalibration after alignment corrections that change the vehicle's thrust angle.

Compatible With the Bosch DAS 3000 System

The CTA218 boards mount directly to the Bosch DAS 3000 recalibration frame. The DAS 3000 system uses wheel-hub alignment markers and floor positioning guides — combined with on-screen instructions from the paired scan tool — to place the frame and target boards at the correct distance and angle for each vehicle. This guided workflow removes the guesswork from setup and reduces the chance of technician error during a procedure that has real safety implications.

The DAS 3000 system also uses the Bosch ADAS Positioning (BAP) system for precise fixture placement. If your shop already runs Bosch ADS scan tools and has the DAS 3000 frame, the CTA218 is the missing piece that unlocks Nissan and Infiniti static calibration capability.

Which Vehicles These Cover

The CTA218 boards cover Nissan and Infiniti models equipped with forward-facing ADAS cameras that require static target-board calibration. Exact model-year coverage and specific system compatibility are confirmed through the Bosch ADAS software paired with your ADS 525X or ADS 625X. If you need a coverage check for a specific vehicle before purchasing, contact us and we'll verify it.

What's in the Box

• Nissan and Infiniti-specific ADAS calibration target boards (CTA218 set)
• Compatible with Bosch DAS 3000 recalibration frame
• For use with Bosch ADS 525X and ADS 625X scan tools

Buying Consideration: CTA Boards vs. Full System

The CTA218 boards are an accessory to the DAS 3000 system — they do not function as a standalone calibration tool. If your shop does not yet have a DAS 3000 frame and a compatible Bosch scan tool, you'll need those first. If you're already running the DAS 3000 and want to expand into Nissan and Infiniti coverage, the CTA218 is a straightforward add-on at $599.99. If you're building out a full multi-brand ADAS capability, we can walk you through which CTA board sets cover your typical vehicle mix.

Why Buy From OEM Diagnostic Tools?

OEM Diagnostic Tools has specialized in professional diagnostic equipment since 2016. We stock Bosch ADAS tools and accessories, including the full DAS 3000 ecosystem, and our team can help you spec the right combination for your shop's vehicle mix. Every purchase includes free shipping, free pre- and post-sale technical support at 866-217-0063, and the full manufacturer warranty. We don't push equipment you don't need — if a different configuration fits your workflow better, we'll tell you.

Call 866-217-0063 for quick answers and help!