Autel Set of Calibration Mats for Subaru — CSC1014-17-18A-18B

This set of four Autel calibration mats is purpose-built for Subaru EyeSight and ADAS static calibration procedures when used with Autel's CSC (Calibration Standard Components) frame system. If your shop handles Subaru windshield replacements, camera replacements, or front-end repairs on EyeSight-equipped vehicles, these mats are required to complete the calibration correctly — you cannot substitute generic targets or skip the mat-based positioning step.

What This Set Is and What It Does

Autel's ADAS calibration system relies on precise, vehicle-specific targets and mats. These four mats — identified by part suffixes 17, 18A, 18B, and the base CSC1014 set — correspond to specific Subaru calibration procedures within the Autel software workflow. Each mat provides the ground-level reference pattern the system uses to verify camera alignment relative to the vehicle centerline and ground plane. Without the correct mats, the software cannot complete static calibration and will flag the procedure as incomplete.

• Purpose: Subaru EyeSight stereo camera and ADAS static calibration using the Autel CSC frame
• Mat count: Full set of four mats (CSC1014, -17, -18A, -18B) covering multiple Subaru calibration scenarios
• Use with: Autel CSC calibration frame paired with MaxiSYS Ultra, MS909, MS919, or Elite II diagnostic tablets running Autel ADAS software
• Calibration type: Static (in-shop, target-based) — no road drive required when these mats are used correctly
• Trigger conditions: Required after windshield R&R, EyeSight camera replacement or adjustment, front-end collision repair, or any procedure that disturbs camera aim on Subaru EyeSight vehicles

Who Needs This Set

This mat set is for shops that already own the Autel CSC frame and are seeing Subaru EyeSight vehicles come through for windshield work or collision-related camera recalibration. Subaru EyeSight uses a dual stereo camera mounted at the top of the windshield — every windshield replacement on an EyeSight-equipped model requires stereo camera recalibration before the vehicle is safe to return to the customer.

If you are a glass shop adding ADAS calibration as a revenue line, or a collision center handling Subaru repairs, this mat set is what converts your existing Autel CSC frame into a Subaru-capable calibration station. Without the correct mats, your CSC frame cannot perform Subaru procedures — the Autel software will not proceed.

This is not a general-purpose accessory. It is a required consumable component for specific Subaru calibration procedures. If you are not sure whether your current procedure list requires all four mats in this set, contact us and we will walk through the vehicle coverage with you before you order.

Compatibility and Software Requirements

• Frame: Autel CSC (Calibration Standard Components) frame — required, sold separately
• Tablet: MaxiSYS Ultra, MS909, MS919, or Elite II with current Autel ADAS software subscription
• Vehicle coverage: Subaru models equipped with EyeSight stereo camera system — exact model-year coverage confirmed in Autel ADAS software vehicle selection menu
• Calibration mode: Static in-bay calibration; requires level floor and adequate ceiling height per Autel CSC setup requirements

Practical Notes for Your Shop

Autel calibration mats are precision-printed and must be kept flat, clean, and undamaged. Creased, dirty, or faded mats will cause the camera recognition step to fail or return inconsistent results. Store them rolled or flat in a protected case between uses. If a mat is damaged, replace it — attempting calibration with a compromised mat wastes time and risks an inaccurate calibration result that won't be caught until a road test or customer complaint.

The $1,149.99 price for this four-mat set reflects Autel's vehicle-specific engineering and the precision printing required for accurate static calibration. Compare that cost against the liability exposure of returning a Subaru EyeSight vehicle with an uncalibrated or incorrectly calibrated stereo camera system.

Why Buy From OEM Diagnostic Tools?

OEM Diagnostic Tools has specialized in professional ADAS and diagnostic equipment since 2016. We stock Autel's full CSC accessory line and can confirm which mats your specific Subaru procedures require before you order. Every order ships free. Our tech support line (866-217-0063) is staffed by people who actually use this equipment — call before you buy if you need help matching mats to your CSC frame configuration or verifying Subaru model coverage. Full manufacturer warranty applies. We will give you an honest answer if a different configuration fits your shop better.

Call 866-217-0063 for quick answers and help!