Autel MaxiSYS IA700AST — Alignment Pre-Check + All-Systems ADAS with MS909 Tablet

The IA700AST is the complete all-systems IA700 package with the MaxiSYS 909 S2 tablet included. It has everything needed to calibrate every ADAS system type — camera, radar, lidar, and night vision — plus a full-featured advanced diagnostic tablet, out of the box. This is the highest-capability IA700 configuration and the right choice for a collision center, dealership, or full-service shop that needs to handle any ADAS calibration that walks in the door.

What's Included

• IA700 Calibration Frame with robotic crossbar and 6 HD positioning/tracking cameras
• MaxiSYS 909 S2 tablet — wireless VCI and J2534 pass-thru programming device
• ADAS calibration software upgrade card for static and dynamic calibration coverage
• LDW targets and patterns for Mercedes-Benz, Nissan, Infiniti, Hyundai, Kia, Toyota, Lexus, Mazda, Mitsubishi, Subaru, Volkswagen, Audi, and Alfa Romeo
• Target case
• Radar, lidar, and night vision calibrators (all-systems equipment)
• AVM (Around-View Monitoring) calibration mats
• Four tire clamps with camera targets
• Steering wheel lock, brake chocks, power supply, alignment aid, frame cover
• One-year Limited Warranty

Vehicle Coverage

The all-systems ADAS package covers virtually every ADAS-equipped vehicle in the current U.S. market:

• LDW camera calibrations for 13 vehicle brands with specific targets and patterns included
• Radar-based ACC and collision warning calibrations — front and rear
• AVM (Around-View Monitoring) systems — includes calibration mats for Nissan, Mercedes-Benz, Volkswagen, Honda, General Motors, Toyota, and Mitsubishi
• LiDAR and night vision systems on equipped vehicles
• Static and dynamic ADAS calibration methods for most U.S., Asian, and European ADAS-equipped vehicles

The MaxiSYS 909 S2 Tablet

The included tablet is not a stripped-down ADAS-only controller — it is Autel's full-featured 9.7" advanced diagnostic tablet with wireless VCI and J2534 pass-thru programming capability. It supports bi-directional active tests, special functions, coding and adaptations, 40+ service menu tasks, and topology module mapping. You can perform a complete pre-scan, clear all faults, perform service resets, and document the post-calibration scan — all in the same workflow on the same tablet.

IA700 Platform Core Features

Fully Optical Target Placement — 6x Faster Than Mechanical

The IA700 uses six high-definition cameras embedded in the frame's crossbar, combined with camera-equipped tire clamps, to optically determine the exact position of targets and patterns relative to the vehicle. The MaxiSYS tablet calculates current angle, distance, and offset, and displays easy-to-follow instructions for frame adjustments. Green checkmarks confirm each parameter when correct position is reached. This eliminates the tape measure and manual measurement approach entirely — Autel states the optical system reduces setup time by 6x versus mechanical measurements.

Robotic Crossbar with Automatic Height Adjustment

Six HD tracking cameras in the removable crossbar monitor tire clamp target positions. The robotic frame movement sets the vertical calibration position automatically to 0.02° accuracy — the same spec as the IA1000. No manual cranking to estimate heights.

Integrated Wheel Alignment Pre-Check

Every IA700 package includes wheel alignment pre-check. Before performing any ADAS calibration, the system optically measures the vehicle's current alignment specifications and compares them against OEM tolerances. If the vehicle is within spec, the technician can proceed to calibration with confidence. If not, the system flags it. This is a critical step — misaligned vehicles produce inaccurate and potentially unsafe ADAS calibrations, and the alignment pre-check generates a documented report showing the vehicle was within OEM tolerances before calibration began.

Unlevel Floor Compensation

Not every shop floor is perfectly level, and mobile calibration adds additional surface variability. The IA700 compensates for unlevel floors — you select the surface type (level, unlevel, or on a rack) and the system accounts for it. This eliminates failed calibrations due to floor conditions, which is a real problem with systems that require a perfectly level surface.

Quick Disassembly for Mobile Use

The IA700 breaks down into 5 primary parts in under 90 seconds for transport between bays or between shops. The included dust cover protects the system when stored. For shops that do mobile ADAS calibration at dealerships, body shops, or fleet locations, the IA700's portability is a genuine operational advantage.

Target and System Compatibility

The IA700 uses the same targets, patterns, and calibration components as Autel's MA600 and IA900 systems. If your shop already operates an MA600 or IA900, an IA700 adds a second calibration bay without purchasing a second complete set of targets — existing targets work on both systems. For MA600 users, the IA700 adds optical positioning and alignment pre-check, a meaningful upgrade in speed and accuracy.

Tablet Compatibility

The IA700 requires a MaxiSYS 909, MS919, or MS Ultra tablet plus an ADAS calibration software upgrade card for static and dynamic calibration coverage. Packages with a "T" suffix include the MaxiSYS 909 S2 tablet; packages without "T" require you to supply a compatible tablet separately.

IA700 Package Lineup

• IA700 — Frame only, alignment pre-check only (no tablet, no calibration targets)
• IA700T — Frame + MaxiSYS 909 S2 Tablet (alignment pre-check + tablet, no ADAS targets)
• IA700LDW — Frame + LDW targets (no tablet)
• IA700LDWT — Frame + MaxiSYS 909 S2 + LDW targets
• IA700AS — Frame + all-systems targets (no tablet)
• IA700AST — Frame + MaxiSYS 909 S2 + all-systems targets

Why Buy the Autel IA700 ADAS All-Systems Calibration System with MS909 Tablet From Autel Diagnostic Tools?

Autel Diagnostic Tools has specialized in Autel ADAS calibration systems since 2016. We carry the full IA700 package lineup and can help you match the right configuration to your shop's space, volume, and existing equipment. If you have an MA600 or IA900 and are evaluating the IA700 as a complement or upgrade, we can walk you through exactly what carries over and what changes. Free shipping, free tech support at 866-217-0063, one-year manufacturer warranty, and straightforward guidance on the right package.

Call 866-217-0063 for quick answers and help!

Why Buy From OEM Diagnostic Tools?

OEM Diagnostic Tools has specialized in professional diagnostic and ADAS calibration equipment since 2016. We don't just sell the hardware — we help you configure it for your shop's workflow and vehicle mix. Every order ships free and includes free technical support at 866-217-0063 and the full manufacturer warranty. If you're weighing whether this is the right tool for your shop or whether another configuration fits better, call us for an honest answer, not a sales pitch.

Call 866-217-0063 for quick answers and help!