Autel ADAS Standard Calibration Package 1 (ADASFRAMESP)

The ADAS Standard Calibration Package 1 is Autel's entry point into professional ADAS target-based calibration. If your shop replaces windshields, performs front-end repairs, or handles camera and radar R&R, you need a calibration system — and this package gives you the core hardware and software to do it right, in-house, without sending vehicles to the dealer.

At $5,237, this is a serious tool purchase. Here's what you're actually getting and who it's built for.

What This Package Is

The ADASFRAMESP is built around Autel's CSC (Calibration Standard Components) frame system — a precision-engineered floor-standing calibration rig that holds vehicle-specific targets at the correct position, height, and angle. The frame pairs with Autel's ADAS calibration software running on a compatible MaxiSYS tablet (MS909, MS919, Ultra, or Elite II) to walk a technician through static calibration procedures step by step.

Static calibration means the vehicle sits in your bay while a calibration target is positioned in front of it according to OEM-specified measurements. The diagnostic tablet reads the camera or radar sensor, confirms the target is positioned correctly, and commands the system to recalibrate. No road drive required for static procedures.

Who Needs This Package

• Auto glass shops — Windshield replacement triggers front camera recalibration on virtually every ADAS-equipped vehicle built after 2016. Without in-house capability, you're either subcontracting the calibration or sending customers to a dealer.
• Collision repair centers — Any front-end work that moves a bumper, hood, or grille assembly can knock ADAS sensors out of alignment. This system lets your shop complete the full repair cycle without a separate trip to a calibration vendor.
• Independent repair shops — If you're working on newer vehicles with lane keep assist, automatic emergency braking, or adaptive cruise control, calibration is part of the job. This package gives you the tools to bill for it properly.

Calibration Capabilities

• Front camera (LKAS/LDW/AEB) — Lane keeping, lane departure warning, and automatic emergency braking systems all rely on forward-facing cameras that require recalibration after windshield work or camera replacement.
• Front radar (ACC) — Adaptive cruise control radar units require static target calibration after replacement or significant front-end collision repair.
• Surround-view / AVM systems — Autel's ADAS software supports around-view monitor calibration where vehicle-specific targets and procedures are available.
• Blind-spot monitoring — Rear corner radar sensors on supported vehicles.
• Night vision systems — Infrared camera calibration on supported makes.

Static vs. Dynamic Calibration

This package is primarily a static calibration system. Static procedures are performed in your bay with the vehicle stationary. Many OEMs require static calibration first, followed by a dynamic drive to complete the process — the tablet software will indicate when a road test is required. Dynamic-only calibrations (where no target is needed) can be performed with just the tablet and software; the frame and targets are used for static procedures.

Compatible Diagnostic Tablets

The ADASFRAMESP frame and target system requires a compatible Autel MaxiSYS tablet running Autel's ADAS application. Compatible tablets include the MS909, MS919, MaxiSYS Ultra, and Elite II. If you do not already own one of these tablets, verify compatibility and software licensing before purchasing — the frame alone does not perform calibrations without the tablet and active software subscription.

What's in the Box

Exact package contents are confirmed at time of order. The ADASFRAMESP typically includes the CSC calibration frame, a set of standard ADAS calibration targets for supported vehicle types, mounting hardware, a carrying/storage case for targets, and setup documentation. Contact us at 866-217-0063 for a current contents list and to confirm which vehicle-specific targets are included in this configuration.

When This Package Is the Right Choice

• Your shop performs 10+ windshields per month and is currently subcontracting calibrations
• You're a collision center doing front-end work on late-model vehicles
• You want static calibration capability without the cost of a combined wheel alignment + ADAS system like the IA900WA
• You already own a compatible MaxiSYS tablet and need the frame and target hardware

When You Might Need More

If your shop also does alignment work, consider the Autel IA900WA, which combines a full wheel alignment system with ADAS calibration in one unit. The ADASFRAMESP is calibration-only — it does not measure alignment angles. For shops doing high-volume alignment and ADAS work, the combined system may be a better investment.

Why Buy From OEM Diagnostic Tools?

• Specialist since 2016 — We sell diagnostic and calibration equipment exclusively. Our staff uses these tools and can give you real guidance on what fits your shop.
• Free shipping — On this and all orders.
• Free tech support — Call 866-217-0063. We help you set up and use the equipment, not just sell it to you.
• Full manufacturer warranty — All Autel equipment sold by OEM Diagnostic Tools is covered under the full Autel warranty.
• Honest upgrade guidance — We'll tell you if a different configuration fits your shop better, even if it costs less.

Call 866-217-0063 for quick answers and help!